Dual La2a - [silent:arts] version

This section is for registered users to discussspecific projects and troubleshooting.

Moderatoren: TVPstudio, kubi

bernbrue
Beiträge: 1128
Registriert: Do Jun 29, 2006 4:55 pm
Wohnort: Wolfenbüttel

Beitrag von bernbrue »

Hi,
could look like this:

Bild

:)
regards
Bernd

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

Looks good, but the Power Switch in the middle ???
and remember: to fit it in a 2U case, modifie the sockets of V104 / 204 (while you are there do V102 / 202 too).
volker
olafmatt hat geschrieben:Strom kann tot machen

waldorfcave
Beiträge: 265
Registriert: Sa Jun 03, 2006 6:26 pm
Wohnort: Kölle
Kontaktdaten:

Beitrag von waldorfcave »

I started to stuff the nice pcbs. :P

Can i use 1/4 Watt resistors or should they be 1/2Watt as written in the
drip manual :?:

r229,r129 and r134, r234 are 3 watt as written in the parts list.

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

I used 1/4 Watt wtih no problems.
and I used 2W (with spacers) instead of 3W - they get a little hot, but it works.
volker
olafmatt hat geschrieben:Strom kann tot machen

bernbrue
Beiträge: 1128
Registriert: Do Jun 29, 2006 4:55 pm
Wohnort: Wolfenbüttel

Beitrag von bernbrue »

[silent:arts] hat geschrieben: to fit it in a 2U case, modifie the sockets of V104 / 204 (while you are there do V102 / 202 too).
Hi Volker,
for the tube sockets, what exactly do I have to do with them? Removing upper or lower part to reduce their height?
I've got these sockets:
Bild

regards
Bernd

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

just remove the upper part (dremel works well):

Bild
Zuletzt geändert von [silent:arts] am Fr Feb 11, 2011 8:30 am, insgesamt 1-mal geändert.
volker
olafmatt hat geschrieben:Strom kann tot machen

bernbrue
Beiträge: 1128
Registriert: Do Jun 29, 2006 4:55 pm
Wohnort: Wolfenbüttel

Beitrag von bernbrue »

Ah, I see, I thought I had to remove the upper part of the ceramic socket, so the upper parts of the pins have to be removed. Thx Volker.
regards
Bernd

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

:D yes, only the upper part parts of the pins :D
gave me the 3 mm I needed (when using 5mm spacers - and is case dependent)
volker
olafmatt hat geschrieben:Strom kann tot machen

ChuckD
Beiträge: 462
Registriert: Fr Okt 26, 2007 10:49 pm
Wohnort: Irvine California US
Kontaktdaten:

Beitrag von ChuckD »

Why did you go with the Solen 10uF caps instead of the TC72 Mallory?
Did you get a chance to compare the two?

Starting my BOM. HEy if anyone is interested I have finished sourcing the parts# for the Caps in North America. (Mouser and PartsConnexion)

Still can't believe we can get by with 1/4W resistors!


I'll post it up if there are any Folks beside me building one over here.

-ChuckD

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

ChuckD hat geschrieben:Why did you go with the Solen 10uF caps instead of the TC72 Mallory?
Did you get a chance to compare the two?
:-( no, haven't compared them. the easy answer is: I just used components I had arround, or where I knew I can buy them :lol:
I have no idea if there is any source for the Mallory in europe.

oh, and the 1/4W resistors work fine in my unit :wink:
(but remember the four 2W resistors)
volker
olafmatt hat geschrieben:Strom kann tot machen

ChuckD
Beiträge: 462
Registriert: Fr Okt 26, 2007 10:49 pm
Wohnort: Irvine California US
Kontaktdaten:

Beitrag von ChuckD »

Volker,

I have 4 older Mallory Caps (silver cans) that someone gave to me for free. Send me you address and I will mail you 2 of them! I will use the other two on mine. I measured them with my Fluke MM and 2 came out as ~13uF and the other 2 came out as ~12uF so I will pair them up that way.

Not sure if they are good. They are new old stock but they were free ... so.

I will throw them in the post for you.

-ChuckD

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

hey Chuck,

if you don't need them - many thanks :D
volker
olafmatt hat geschrieben:Strom kann tot machen

bernbrue
Beiträge: 1128
Registriert: Do Jun 29, 2006 4:55 pm
Wohnort: Wolfenbüttel

Beitrag von bernbrue »

Volker,
there are two resistors (R125,225) to be determined. They seem to be related to the GR meter. Assuming, I´ll take a Sifam VU, what are there values? What did you take there? Thx a lot.
Cheers
Bernd

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Beitrag von [silent:arts] »

Bernd,
this is the resistor Urei provided with each T4b.
rumors are they are always 33K (mine were both 33k).
volker
olafmatt hat geschrieben:Strom kann tot machen

ChuckD
Beiträge: 462
Registriert: Fr Okt 26, 2007 10:49 pm
Wohnort: Irvine California US
Kontaktdaten:

Beitrag von ChuckD »

I was about to ask the same question!

I'll go with 33K I guess.

-Chuck

Antworten